Wall holder 90° for TQS4 O. With this holder you can place the sensor further from the wall.
The sensor is not included in the delivery.
LynxPro-RTD - Bluetooth Enabled RTD Temperature Data Logger with LCD Display
LynxPro-RH - Bluetooth Temperature & Humidity Data Logger
QMA150 , Ch Fz: 100 N ; Ch Mz: 2.5 Nm , Custom Miniature Torque & Thrust Sensor , 0.472" [12 mm] H x 1.181" [30 mm] OD , Material - 2024-T4 Aluminum, 6 Cond. Spiral Teflon Cable , 3.94" Long, RoHS Compliant
USB to UART Converter, Bus Powered, Type A Connector, 5 ft [1.5 m] Long , 7 Pin Nano Mating Connector , Anodized Aluminum Shell , 30 AWG 7 Conductor Cable with Polyurethane Jacket , RoHS
LSB206 , S-Beam Jr.™ Fatigue Rated Tension and Compression Load Cell with UART Digital Output , M3x0.5-Thread , Overload Protection , Material - 17-4 PH S.S. , RoHS Compliant , 7 Pin Nano Receptacle
LSB206 , S-Beam Jr.™ Fatigue Rated Tension & Compression Load Cell with UART / SPI Digital Output , M3x0.5-Thread , Overload Protection , 17-4 PH S.S. , RoHS , 32 Awg 10 Conductor Spiral Shielded Silicone Jacket , 6 in Long
Panel meter for loadcell with 4 and 6 wires, 96 x 48 mm (1/8 DIN), 6- digits, 14 mm LED height, Power Supply 24VDC
Panel meter for loadcell with 4 and 6 wires, 96 x 48 mm (1/8 DIN), 6- digits, 14 mm LED height, Power Supply 230VAC/50Hz
PIMZOS In-line Cable Loadcell Converter, Output 4-20mA
PIMZOS Loadcell mV/V to 10V and 4-20mA converter
PIMZOS Loadcell mV/V to RS485 Modbus converter
Z-SG3, Loadcell versterker, USB, RS485 Modbus +Analoge uitgang
Digital panel meter multi signal input. Recommended for all types of industrial applications. Versatile and reliable, covers a wide range of analog signals with a single instrument. Modular architecture.
Converter for Frequency, Impulses, RPM speed/Flow. Output 4/20mA or 0/10Vdc. Isolated 3 way. Configurable for NPN, PNP, Pick-up, Namur, Dry contacts. Dedicated input to measure frequency from AC voltage up to 600 Vac. From 1 Hertz up to 1 MHertz
Loadcell Amplifier, +5 Vdc excitation with ‘sense’. Connect of up to 4 load cells (350 Ohms), 4 and 6 wire sensors, uni- and bipolar ranges up to ±80 mV. Output 4/20 mA (active or passive) and 0/10 Vdc. Power supply 18 to 265 VAC/DC, 3 way isolated.
Converter for AC/DC signals. Output signal in 4/20mA and 0/10Vdc. Isolated 3 ways.
Converter for process, temperatures, resistances and potentiometer signals
AC-DC Ultra slim DIN rail power supply 12V/1.25A. With electronic protection against short circuit, overload and overvoltage. The possibility of fine-tuning the output voltage with a trimmer.
IAA105 - Bluetooth & USB Configurable Full Bridge Strain Gauge Signal Conditioning Voltage Amplifier , Multiple Outputs Between +/-10 VDC , Up to 10 kHz Bandwidth , Detachable Screw Terminal Connectors , Metallic Enclosure , 35 mm DIN Clip
PyroMiniUSB - PMUXCF, Close Focus optics - (3.5 mm @ 50 mm)
USB Infrared Temperature Sensor for Benchtop, Laboratory and Education