Very precise and robust inclination switch with merged relay output for monitoring 2 axes
Adjustments of switching angle and zero position
The HNS-45-D2-R monitors the inclination of 2 axes, X and Y.
The switching angle can be defined independently for both axes.
The switching angles are automatically mirrored on the respective axis and thus monitor the inclination
both in plus and minus direction.
The zero position can be changed subsequently without having to reprogram the switching angles.
Safety function in case of power failure
The common relay changeover contact drops out both when the switching angles are reached
and as a safety functionin case of power failure.
The sensor therefore emits a signal.
| Protection class: | IP67 |
| Material (housing): | Aluminum die-cast |
| Electrical connection: | M12 8-pole |
| Operating voltage: | 16...30 VDC |
| Current consumption: | < 30 mA |
| max. voltage relay output: | 30 V |
| max. current relay output: | 2 A |
| Output signal: | 1 x potential free relay, change-over contact |
| Switching angle X-Axis: | 0,5°...45° |
| Switching angle Y-Axis: | 0,5°...45° |
| Hysteresis mode: | 0,1°…2° with potentiometer |
| Inertia (cutt-off frequency): | 5...0,2 sec. (0,2...5 Hz) |
| Accuracy: | ±0,05° + 1% of the switching angle |
| Resolution sensor: | 0,025° |
| Calibration precision: | ± 0,05° |
| Operating temperature: | Operation -25°...+80°C |
More Information about inclination switches and inclination sensors
Inclination switches may be installed in stationary or mobile applications, in which it is necessary to measure and safely supervise any kind of an angle. The moment a preset angle has been reached, the respective switching output will open or close. Typical cases of application of inclination switches (which are often also called crash sensors due to their case of operation) are tilt protection devices, lifting platforms, forklifts, cranes, excavators, agricultural machinery, truck trailers and also a lot of electric car charging stations. But inclinations switches are also required and very useful in many more different areas such as mobile homes, yachts, off-road vehicles or wind power plants.
Inclination Switches / Inclination Sensors available from PIMZOS.COM
The electronic inclination switches, also called inclinometers, are equipped with either transistor outputs or relay outputs. They are designed for professional continuous operation and excel by highest quality and accuracy as well as through a robust, compact and an easy-to-assemble design. The sensor element and the electronics are protected against environmental influences excellently by a durable metal housing and the potting compound. All our inclination switches work without mercury and are temperature compensated. Angles are measured contactless by a modern, highly accurate Micro Electromechanical System (MEMS) with intelligent evaluation by a micro controller.
Check It ! Maybe you need this too ...
