I-7520A-CR, Isolated RS-232 to RS-422/485 converter, 3000 V isolation on RS485 side
Product highlights
I-7520 and I-7520R are RS-232 to RS-485 converters, while I-7520A and I-7520AR can convert RS-232 signals to both RS-422 or RS-485. The main benefit of These converters is The Possibility to use the higher transmission range and networking capabilities or RS-422 / RS-485 networks without any hardware or software modification in the application environment.
I-7520 converter installation is very easy: the baud rate is automatically detected (max 155 200 bps) and adjusted by the integrated self-tuning ASIC, the converter is mounted on a DIN rail, and is powered over an unregulated 10 to 30 VDC power supply .
The isolation between type I-7520 / I-7520A and I-7520R / I-7520AR is different. I-7520 and I-7520A, the 3kv galvanic isolation is on the RS-232 side, allo wing the electrical protection of the RS-232 device from electrical disturbances occuring on the RS-422/485 side. I-7520R and I-7520AR, the isolation is on the RS-485 side, All which is useful in the case the RS-232 could cause electrical threats.
