Industrial Grade, 1 channel Remote Power Management module
Country Outlet : GE (Schuko) for Europe.
100-240VAC via C14 connector INPUT, 10A
Maximum Current : 10A
1x Current Meter (Amps)
1xThermometer
Active surge filter
Dimensions : (LxWxH) 86x86x80mm
HTTP / HTTPS/SSL webserver Linux,CGI
IPv4/IPv6/mDNS
MQTT, Telnet TLS
SNMP V1 & V2 with Eventlog
SMTP, NTP
1 Ping watchdog
8 Schedulers
Interface : LED Indicators and Hardware Rest Button
Operating Temperature : 0 to +50 °C
Network Connection : RJ-45 10/100Mb Ethernet port
IP9655 provides remote manual control of the critical devices by clicking on a few buttons on the smart phone or computer webpage.
Stop the problem device by cutting off the power to a specific outlet. By cycling the power off and restarting the device remotely, you save time and money by eliminating the need to send technicians to the root cause of the problem. The design is most suitable for inductance & capacitance loding such as motor,air conditionals for inductance loading. Special algorithm to minimize the voltage spike and reduce environmental radiation of EMI. It allow to adjust swithching time to cancel the inrush contact current and voltage spike. Managers can monitor the total power usage information of PDU from the remote end through the Internet to fully understand the power consumption of all the devices. Set up overload event alerts and notify managers via Email and TRAP, allowing managers to respond to crises in the shortest possible time to minimize disasters. Provide central management software, which can manage a large number of PDUs' power, temperature and humidity information. The database stores the power consumption information of the power strip and provides the history curve chart for the manager's reference.
Check It ! Maybe you need this too ...
