Collectie

Wonpro WA320 - IEC320 to C14

Adapter to fit back of Aviosys IP Power 9258. Now you can plug-in a normal power plug. IEC320 to Universal Plug adapter

Attention : For some EU-plugs, Earth is not supplied.

Vergelijk

€ 3,10 Excl. btw

Bekijken

Stroomkabel IEC-320-C14 | IEC-320-C13

Mains Cable for use with IP Power, Male / Female, lenght 1,8 meter. Can be used with IP Power 9258 range to connect to your PC / Server

Vergelijk

€ 1,98 Excl. btw

Bekijken

IP Power 9258S-PING

Best Price/Performance ratio with PING

Vergelijk

€ 125,- Excl. btw

Bekijken

DCA-10 , DC Brushed Motor Drive

The DCA-10 from Motor Control Technologies, LLC is a robust and flexible solution for driving a DC brushed motor. The DCA-10 can source up to 5A at 24 VDC, and is fully compatible with the LabJack U12, U3, and UE9. An easy to use control scheme allow...

Vergelijk

€ 93,-

€ 87,42 Excl. btw

Bekijken

EI1034

Easy to use and very accurate temperature probe. Features a waterproof stainless-steel probe, a high-level linear output of 10 mV per degree F, a typical accuracy of ±0.4 °F (±0.22 °C) at room temperature, and a range of 0 to +300 °F (-17 to +150 °C,...

Vergelijk

€ 73,67

€ 69,25 Excl. btw

Bekijken

EI1022

Easy to use and inexpensive temperature probe. Features a plastic probe, a high-level linear output of 10 mV per degree K, a typical accuracy of ±1°C (±1.8°F) at room temperature, and a range of -40 to +100 °C (-40 to +212 °F).

Vergelijk

€ 41,93

€ 39,41 Excl. btw

Bekijken

EB37

The EB37 experiment board connects to the LabJackUE9’s DB37 connector and provides convenient screw terminal access. Also provided is a solderless breadboard and useful power supplies. The EB37 is designed to connect directly to the LabJack, but can ...

Vergelijk

€ 145,-

€ 136,30 Excl. btw

Bekijken

RB16

The RB16 provides a versatile method for electricians, engineers, and other qualified individuals, to interface a LabJack U12 with high voltages/currents. The included DB25 cable connects the RB16 to a LabJack U12. The RB16 has sockets for mounting u...

Vergelijk

€ 215,33

€ 202,41 Excl. btw

Bekijken

RB12 Relay Board

The RB12 provides a convenient interface to industry standard I/O modules, allowing electricians, engineers, and other qualified individuals, to interface a LabJack with high voltages/currents. Logic buffers are used to provide the 10-15 mA needed fo...

Vergelijk

€ 185,-

€ 173,90 Excl. btw

Bekijken

CB37

Provides convenient screw terminals for the DB37 connector on the LabJacks. Includes a screwdriver. Is compatible with LJTick signal-conditioning modules.

Vergelijk

€ 58,-

€ 54,52 Excl. btw

Bekijken

CB25

Provides screw terminal connections for the LabJack U12's 16 extra digital I/O. A screwdriver and DB25 cable are included. For the LabJack U12 only.

Vergelijk

€ 45,-

€ 42,30 Excl. btw

Bekijken

CB15

Provides convenient screw terminals for the DB15 connector on LabJacks. Includes a screwdriver.

Vergelijk

€ 33,-

€ 31,02 Excl. btw

Bekijken

LJTick-Proto

The LJTick-Proto (LJTP) consists of an 8x8 grid of holes for prototyping custom signal-conditioning ticks. The 4-pin design plugs into the standard AIN/AIN/GND/VS screw terminal block found on newer LabJacks such as the U3 and UE9. Includes 3 loose p...

Vergelijk

€ 10,-

€ 9,40 Excl. btw

Bekijken

LJTick-DAC

Provides a pair of 14-bit analog outputs with a range of +/- 10 volts. Plugs into any digital I/O block, and thus up to 10 of these can be used per LabJack to add 20 analog outputs. Works with any UD family device (U3/U6/UE9), except for U3 hardware ...

Vergelijk

€ 95,-

€ 89,30 Excl. btw

Bekijken

LJTick-InAmp

Signal-conditioning module provides two instrumentation amplifiers ideal for low-level signals such as bridge circuits (e.g. strain gauges) and thermocouples.

Vergelijk

€ 75,-

€ 70,50 Excl. btw

Bekijken